Siemens SINUMERIK 840C - Page 107

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–99
SINUMERIK 840C / SIMODRIVE 611–D (DA)
101005 Faulty load list on MM
–
NCK is not powering-up: MMC powers up without NCK
S Last file when booting is not NCK_SYS
S Reinstall NCK software on MMC
101006 MMC–NC data link not ready
–
NCK is not powering-up: MMC powers up without NCK
S Internal software error in the data link at driver level
S Install new software on MMC
S Replace hardware
101008 Remove EPROM submodule on NC–CPU
–
NCK is not powering-up: MMC powers up without NCK
EPROM module is plugged on NC CPU 386
S See error message: replace CPU, if necessary (if no RESTART EPROM is plugged)
101200 Insufficient memory for UMS
On start–up of control
UMS is not loaded.
The UMS (of customer or Siemens) cannot be loaded with the current memory configuration because it is larger
than the setting in NC MD 60000 (from SW 4; fixed setting 512 KB until SW 3)
Change memory configuration (from SW 4); set machine data MD 60000 accordingly!
Alarm from SW 6.3
101201 Standard memory configuration – error in configuration file
On start–up of control after data loss
Booting with standard configuration
Memory configuration could not be loaded and activated. Error in user configuration.
Create new user configuration
Alarm from SW 6.3
101202 File <%1> not transferred
Start–up of control if the user wishes to load files to the NC using load840c.ini
File %1 is not transferred to the NC
The user entered the names of the files he wishes to load to the NC in the file called load840c.ini. One of the files
cannot be transferred.
Check file name (including path)
Alarm from SW 6.3
102000 Directory does not exist on harddisk OK softkey
S When displaying a data selector in MMC
S Reset to configured initial state of data selector
S The data selector tries to display an area no longer available in the data management
–
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description
01/99