04/96
Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–100
SINUMERIK 840C / SIMODRIVE 611–D (DA)
102010 Configuring error OK softkey
S First display of a data selector in MMC
S Empty display
S Possibly a consequential error, since data selector cannot work in the services, diagnosis, programming area
S Check/change configuration of UMS/FUMS.
102013 Only ... of ... elements displayed OK softkey
When data selector is called
Data only partially displayed
Quantity of displayed data limited internally
–
103000 DUAL PORT RAM error!
–
–
Hardware problem or incorrectly installed by OEM
Replace hardware if necessary
104000 Maximum line length reached OK softkey
When inputting/inserting in the ASCII editor on MMC
Operation is not executed
The maximum line length of the ASCII editor is exceeded
Shorter lines
104001 Search text not found OK softkey
When searching
None
The ASCII editor in the MMC outputs a message that the search for a character string has not been successful.
–
104002 File cannot be opened OK softkey
When displaying an ASCII editor in MMC
Empty display in ASCII editor
ASCII editor cannot find the file to be processed in the data management
None
104004 Buffer is empty OK softkey
ASCII editor when pasting from clipboard
Operation is not executed
By operator action the ASCII editor is requested to paste from the clipboard into the file processed. The clipboard,
however, is empty, not available or faulty. Possibly an operating error
S Other operator action
S Fill clipboard
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description
To Next Page
Loading...
