Siemens SINUMERIK 840C - Page 151

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–143
SINUMERIK 840C / SIMODRIVE 611–D (DA)
146482 ”Only 1 spindle can be programmed in a block”
146483 ”M19 not allowed here”
146484 ”M groups not allowed in this block”
146490 ”G06: inch/metric conversion not allowed”
146491 ”G06: axes to IPO parameters are missing”
146492 ”G06: here only IPO parameter I allowed”
146493 ”G06: positive path length I expected”
146494 ”G06: exactly 3 coefficients K expected”
146500 ”L%1 ignored, because M2, M30 or M17 in block”
146501 ”G%1 desel., because M2, M30 or M17 in block”
146502 ”G%1 deselected, because L call in block”
146510 ”@720 is only possible in traversing block”
146511 ”@714 must be on its own in the block”
146512 ”@%1 is not permitted in contour program”
146513 ”Traversing block must be in its own block”
146520 ”G96: cutting velocity S is missing”
146521 ”Feed is missing”
146522 ”G98 allowed with G0/G1/G36 only”
146523 ”G96 not allowed together with M19”
146524 ”G36: G98 is generated and G%1 is deselected”
146530 ”Option for G%1 is missing”
146531 ”Cylindrical interpolation option is missing”
146532 ”Circle radius programming option is missing”
146533 ”Contour definition SPRINT option missing”
146534 ”Option 5D helical is missing”
146535 ”Program coordination option is missing”
146536 ”Reference point preprocessing option missing”
146537 ”Option extended thread package is missing”
146550 ”G%1 not allowed here –> ignored”
146551 ”G04 block: dwell F, X or S is missing”
146552 ”S/T/angle is missing –> G92 ignored”
146553 ”G92 T: T value > 5 not allowed”
146554 ”G92 P: exactly one axis expected”
146555 ”G92 P: axis is not a rotary axis”
146556 ”G%1: axes for working area limit. are missing”
146557 ”G%1: axis or angle is missing”
1 Alarms
1.5.1 Alarm description