Siemens SINUMERIK 840C - Page 158

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–150
SINUMERIK 840C / SIMODRIVE 611–D (DA)
160036 No mixed I/O module configured OK softkey
When selecting menus for mixed I/O output
Startup menu for mixed I/O output is disabled
Menu for mixed I/O output requires mixed I/O hardware
–
160037 No spindle configured OK softkey
When selecting startup menu for spindles
Startup menu for spindles is disabled
Startup menu for spindles requires at least one NC spindle
Enter NC spindle configuration
160038 Error on DAC initialization OK softkey
When starting startup application
DAC output cannot be started
Internal startup application error
Restart system and repeat procedure
160039 Error in DAC selection for digital drives OK softkey
When parameterizing DAC output
DAC output cannot be started
Internal startup application error
Restart application and repeat procedure
160040 Error in DAC selection for mixed I/Os OK softkey
When parameterizing mixed I/O output
Mixed I/O output cannot be started
Internal startup application error
Restart application and repeat procedure
160041 No more memory space available OK softkey
When starting startup application
Startup functions cannot be executed
No more system memory available
End other area application and repeat procedure
160042 Measured values invalid OK softkey
Measuring functions
Measuring function is aborted
Recorded measured values cannot be used
Check measuring parameters and repeat procedure. A higher amplitude must be selected most especially for path
frequency response measurement
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description