04/96
Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–152
SINUMERIK 840C / SIMODRIVE 611–D (DA)
160051 Division by 0 OK softkey
Startup application
Function aborted
Error on internal consistency check
End application and restart; check measuring parameters
160052 Drive does not acknowledge messages OK softkey
611D communication
611D drives cannot be addressed
Communications partner on drive side is not available
Start up control/drive; deselect faulty module
160053 Function generator already active OK softkey
When starting function generator
Start command is ignored if the function generator is already running
–
–
160054 Wrong block number/file name OK softkey
611D communication
Function aborted
Error on internal consistency check
End application and restart
160055 Absolutely no access rights OK softkey
Startup application
Startup function cannot be executed
Access to required data not possible
End application and restart
160056 Error during job processing OK softkey
611D communication
Function aborted
Error on internal consistency check
End application and restart
160057 Status does not permit job OK softkey
611D communication
Function aborted
Error on internal consistency check
End application and restart
160058 Job could not be processed OK softkey
Startup application
Function aborted
Error on internal consistency check
End application and restart
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description
To Next Page
Loading...
