Siemens SINUMERIK 840D - Page 563

NCK alarms
11/2006 Overview of Alarms
2-563
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
61722 Channel %1 block %2: System error
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61723 Channel %1 block %2: Machining not possible
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: Use a tool with a larger clearance angle.
61724 Channel %1 block %2: Material not available
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61725 Channel %1 block %2: Memory space problem, therefore error in contour
generating
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61726 Channel %1 block %2: Internal error: Memory space problem
_FILECTRL_INTERNAL_ERROR
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61727 Channel %1 block %2: Internal error: Memory space problem
_FILECTRL_EXTERNAL_ERROR
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --
61728 Channel %1 block %2: Internal error: Memory space problem
_ALLOC_P_INTERNAL_ERROR
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Alarm triggered by following cycle: CYCLE950.
Remedy: --