9. The SINUMERIK connection types are displayed in the "Controller Configuration" window.
If you are working in a networked environment, select "HMI-Advanced and SINUMERIK
840D/Di or 810D + PCU50/70".
- OR -
If separately integrated, e.g. via HMI Pro, then select "SINUMERIK with own integration".
Installing SINUMERIK Integrate
7.2 SINUMERIK Integrate with HMI-Advanced
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 155
To Next Page
Loading...
