01/2007
8.2 Requirements
8-180
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
8.2 Requirements
As a condition for creating a PROFIBUS configuration using the default configu-
ration the following components are required:
S SIMATIC STEP 7
S 840Di sl Rack
(a SIMATIC 300 station preconfigured for SINUMERIK 840Di sl. Part of the
PLC basic program)
S SlaveOM
(part of the scope of supply of a SINUMERIK 840Di sl: SIMATIC add–on
software)
SIMATIC STEP 7 (option) is required in the following version or later:
S SIMATIC STEP 7 as of Version 5.3, Service Pack 2
SIMATIC STEP 7 can either be installed directly on the SINUMERIK 840Di sl
PCU or on an external computer (PG/PC).
If SIMATIC STEP 7 is installed on the SINUMERIK 840Di sl, no additional MPI/
PROFIBUS cable is required to load the S7 configuration in the PLC.
Windows applications executed on the SINUMERIK 840Di sl have direct access
to the PLC through the internal MPI interface of the MCI board.
Installation of additional software on the SINUMERIK 840Di sl is described in
detail in Section 17, Page 17-477.
If SIMATIC STEP 7 is installed on an external computer (PG/PC), it must fulfill
the following conditions:
S PG/PC interface is parameterized (see Section 6.2.2, Page 6-135)
S An MPI/PROFIBUS connection exists between the external computer
(PG/PC) and the SINUMERIK 840Di sl.
The 840Di sl Rack is a SIMATIC–300 station preconfigured for SINUMERIK
840Di sl. The following version is available in the hardware catalog of HW Config:
S SINUMERIK 840Di sl with PLC 317–2DP 2AJ10
– Slot 2: SINUMERIK 840Di sl PLC
Standard designation: PLC317–2DP 2AJ10
– Slot X1: MPI/PROFIBUS interface (X102)
Standard name: MPI/DP
– Slot X2: PROFIBUS interface (X101)
Standard name: DP
– Slot 4: SINUMERIK 840Di sl NC
Standard designation: NCK 840D sl
– Slot 5: SINUMERIK CP for Industrial Ethernet TCP/IP
Standard designation: CP 840D sl
SIMATIC STEP 7
SINUMERIK
840Di sl
External computer
(PG/PC)
840Di sl Rack
8 PROFIBUS DP Communication
To Next Page
Loading...
