Siemens Sinumerik 840DiE sl - ONLINE Commissioning

01/2007
9.2 ONLINE commissioning
9-243
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
9.2 ONLINE commissioning
The SINAMICS STARTER drive commissioning tool can be started directly or
indirectly from the SIMATIC STEP 7 project created in Section 6.3, Page 6-139ff
for commissioning a drive unit.
If the SINAMICS STARTER drive commissioning tool is started directly (e.g.
from the Windows taskbar: Start > SIMATIC > STEP 7 > STARTER), a new proj-
ect must first be created. Continue with: Section 9.2.1, Page 9-244.
If the SINAMICS STARTER drive commissioning tool is started indirectly from a
SINAMICS STEP 7 project (double–click on the drive object in the detailed view
of the SIMATIC Manager), the automatic recording of the component topology
and the configuration can be started immediately. Continue with: Section 9.2.2,
Page 9-247.
SIMATIC Manager – SIN840Di sl
SIN840Di sl
File Edit Insert Target System View Tools Window Help
SIMATIC 300(1)
PLC 317–2DP 2AJ10
CP 840D sl
SINAMICS_S120_CU320
SINAMICS S120
< No filter >
Press F1 to open the help. TCP/IP –> Realtek TRL8139
Starting STARTER
directly
Starting STARTER
from STEP 7
9 Drive Commissionin
g
(
SINAMICS
)