Siemens Sinumerik 840DiE sl - Page 386

01/2007
11.6 Handwheels
11-386
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
Parameterizing in the NCK machine data:
Table 11-51 Handwheel assignment
Machine data
Value Description
1st handwheel in NCK
MD11350 $MN_HANDWHEEL_SEGMENT[0] 5 Hardware segment: PROFIBUS
MD11351 $MN_HANDWHEEL_MODULE[0] 1 Reference to logical base address of the handwheel slot of the
1st MCP
MD11352 $MN_HANDWHEEL_INPUT[0] 1 1st handwheel in handwheel slot
2nd handwheel in NCK
MD11350 $MN_HANDWHEEL_SEGMENT[1] 5 Hardware segment: PROFIBUS
MD11351 $MN_HANDWHEEL_MODULE[1] 1 Reference to logical base address of the handwheel slot of the
1st MCP
MD11352 $MN_HANDWHEEL_INPUT[1] 2 2nd handwheel in handwheel slot
3rd handwheel in NCK
MD11350 $MN_HANDWHEEL_SEGMENT[2] 5 Hardware segment: PROFIBUS
MD11351 $MN_HANDWHEEL_MODULE[2] 2 Reference to logical base address of the handwheel slot of the
2nd MCP
MD11352 $MN_HANDWHEEL_INPUT[2] 1 1st handwheel in handwheel slot
3rd handwheel in NCK
MD11350 $MN_HANDWHEEL_SEGMENT[3] 0 No handwheel parameterized
MD11351 $MN_HANDWHEEL_MODULE[3] 0 No handwheel parameterized
MD11352 $MN_HANDWHEEL_INPUT[3] 0 No handwheel parameterized
4th handwheel in NCK
MD11350 $MN_HANDWHEEL_SEGMENT[4] 5 Hardware segment: PROFIBUS
MD11351 $MN_HANDWHEEL_MODULE[4] 6 Reference to logical base address of the handwheel slot of the
3rd MCP
MD11352 $MN_HANDWHEEL_INPUT[4] 1 1st handwheel in handwheel slot
5th handwheel in NCK
MD11350 $MN_HANDWHEEL_SEGMENT[5] 5 Hardware segment: PROFIBUS
MD11351 $MN_HANDWHEEL_MODULE[5] 5 Reference to logical base address of the handwheel slot of the
4th MCP
MD11352 $MN_HANDWHEEL_INPUT[5] 2 2nd handwheel in handwheel slot
Table 11-52 Logical base addresses
Machine data
Value Description
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [0] 288 Logical base address handwheel slot 1st MCP
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [1] 304 Logical base address handwheel slot 2nd MCP
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [4] 330 Logical base address handwheel slot 4th MCP
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [5] 320 Logical base address handwheel slot 3rd MCP
11 NCK Commissionin
g
with HMI Advanced