Siemens Sinumerik 840DiE sl - Syntax for Alarm Text Files

01/2007
12.1 Alarm and message texts
12-416
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
12.1.4 Syntax for alarm text files
The following alarm numbers are available for the cycle, compile cycle and PLC alarms:
Table 12-2 Alarm numbers for cycle, compile cycle and PLC alarms
Number range
Designation Effect Delete
60000 – 60999 Cycle alarms
(Siemens)
Display, interlocking NC
start
Reset
61000 – 61999
()
Display, NC start disable,
axis/spindle standstill
Reset
62000 – 62999 Display Cancel
63000 – 64999 Reserved
65000 – 65999 Cycle alarms
(user)
Display, interlocking NC
start
Reset
66000 – 66999
()
Display, NC start disable,
axis/spindle standstill
Reset
67000 – 67999 Display Cancel
68000 – 69000 Reserved
70000 – 79999 Compile cycle alarms
400000 – 499999 PLC alarms general
500000 – 599999 PLC alarms for channel
600000 – 699999 PLC alarms for axis and
spindle
700000 – 799999 PLC alarms for users
800000 – 899999 PLC alarms for sequence
cascades/graphs
The structure of the text file for cycle and compile cycle alarms is as follows:
Table 12-3 Structure of text file for cycle alarm texts
Alarm number
Display Help ID Text or alarm number
60100 1 0 ”No D number %1 is programmed”
60101 1 0 60100
... ... ... ...
65202 0 1 ”Axis %2 in channel %1 is still moving”
// Alarm text file for cycles in English
References: /FB/, Description of Functions, Basic Functions
P3 PLC Basic Program
Section: Lists
List of alarm numbers
This number defines the alarm display type:
0: Display in alarm line
1: Display in a dialog box
Alarm numbers
Format of the
text file for
cycle alarm texts
Alarm number
Display
12 Alarm and Messa
g
e Texts