01/2007
2.2 MCI2 board for 840Di sl
2-46
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
2.2 MCI2 board for 840Di sl
2.2.1 Module
The MC12 board for 840Di sl is a short 32–bit PCI plug&play card. The MCI2
board referred to below simply as MCI board (M
otion Control Interface) provides
the following interfaces:
S PROFIBUS DP with Motion Control Functionality (X101)
S MPI (Multi–Point Interface) or PROFIBUS DP without Motion Control
Functionality (X102) (alternative)
S MCI board extension (slot variation: Section 2.3, Page 2-53)
The MCI board also provides the following functionality:
S PLC: Compatible with SIMATIC S7 CPU 317–2 DP
S Static memory (SRAM) for storing retentive NCK and PLC–specific user data.
X101: PROFIBUS DP
X102: MPI/DP
X2: MCI board extension
X3: Backup battery
X11: PCI bus
*) locking screws
Internal thread: UNC 4–40
*)
*)
*)
*)
Backup battery connecting cable
Fig. 2-1 Module: MCI2 board for 840Di sl
Designation Order No. (MLFB)
MCI2 board for 840Di sl (as spare part) 6FC5 222–0AA02–2AA0
Order number:
MCI2 board
2 Hardware Descri
tions
To Next Page
Loading...
