Siemens Sinumerik 840DiE sl - Restoring the As-Delivered State

01/2007
16.4 Restoring the as–delivered state
16-474
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
16.4 Restoring the as–delivered state
If the current installation has been damaged o such an extent that it is no longer
possible to continue working, the factory settings of partitions C: (WinPE), E:
(Windows XP) and F: (840Di sl System) of the PCU hard drive can be restored.
This section describes the actions for:
S Restoring the partitions
S Installation of the SINUMERIK 840Di sl applications
Notice
When restoring the hard disk to the ex–works state, all data on the partitions C:,
E: and F: are lost.
16.4.1 Requirements
To restore the ex–works state, the following files supplied with the SINUMERIK
840Di sl must be saved locally on the PCU hard disk:
S D:\IMAGES\base_ou.gho (image file)
S D:\IMAGES\base_ou.inf
The image file *.gho contains the data to be restored.
The info file *.inf contains the description of the data to be restored.
The information in this file is required by the services menu to configure the
image program Norton Ghostt.
Notice
If the info file is not available, the service menu cannot restore the partitions.
16.4.2 Restoring the partitions
The procedure for restoring partitions C:, E: and F: from a local image file is
described in:
References
/IAM2/ CNC Commissioning Part 5
Section: IM8
4 Backing up and restoring data
Save/restore local partitions
Select the image file from which the partitions are to be restored in accordance
with the existing SINUMERIK 840Di sl software version:
S Basic software <Version> <Date>
After the partitions have been restored, the SINUMERIK 840Di sl applications
must be reinstalled.
Image file
Info file
16 Software Installation/U
p
date and Data Backu
p