Layers and protocols
Basically a distinction is made between three port areas:
● System ports / standardized ports
Ports 0 to 1023 (0
hex
to 3FF
hex
)
These ports are reserved for services, if they have not already been assigned as "reserved
ports" of the IANA itself (e.g. for future expansions).
● Registered ports
1024 to 49151 (400
hex
to BFFF
hex
)
These ports are intended for registered services, but can also be used for client programs.
● Dynamic ports
Ports 49152 to 65535 (C000
hex
to FFFF
hex
)
These ports are assigned dynamically from the operating system to client programs.
Connecting
7.2 Communication services and used port numbers
NCU 1760
52 Equipment Manual, 02/2020, A5E45627861B AB
To Next Page
Loading...
