Siemens SINUMERIK ONE PPU 1740-1900 - Page 26

PPU1740 -1900
Temperature 0 to 40 °C (front)
0 to 45 °C (rear)
Air Ventilation passive cooling without fan
Display/Front Touch sensor with Coverglass
Display/Touch Multitouch
Resolution 1920x1080
Type plate
The PPU type plate is located on the rear. All the information required to clearly identify the PPU
is available on the type plate.
Note
The contents of the individual type plate fields on the current control may differ from those
described in this manual, e.g. updated product status, approvals and identifications not yet
issued.
&RPSRQHQWQDPH
$UWLFOHQXPEHU
6HULDOQXPEHU
,'QXPEHU
+DUGZDUHYHUVLRQ
0$&DGGUHVV
3URGXFWFRGH
Figure 3-4 Type plate example- 1740-1500
Note
MAC addresses
The MAC addresses printed on the type plate of the PPU are required for configuring the PLC
I/O Interface communications networks based on PROFINET and Industrial Ethernet. There is
a similar situation for the machine control panels and the I/O modules.
System characteristics
3.1 PPU versions
PPU 1740
26 Equipment Manual, 01/2019, A5E47615272B AA