Siemens SIPROTEC4 7SJ61 - Status Annunciations

Standard mapping 2-3
7SJ61...7SJ63, 7SJ65, 6MD63 PROFIBUS-DP – Bus mapping
C53000-L1840-B006-02
4-7
4.2.1.8 Status annunciations
• Ref. to chap. 1.5.7 for additional notes regarding "Stop data transmission".
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
9/0 >No Volt 1 = Binary input “No voltage (fuse blown)" is active –
9/1 DataStop 1 = "Stop data transmssion" is active –
9/2 Test mode 1 = Test mode is active –
9/3 Cntrl Auth (7SJ63, 7SJ65, 6MD63) Control authority
(0 = REMOTE, 1 = LOCAL)
–
9/4 ModeLOCAL (7SJ63, 7SJ65, 6MD63) Control mode LOCAL
(0 = LOCKED, 1 = UNLOCKED)
–
9/5 ModeREMOTE Control mode REMOTE
(0 = LOCKED , 1 = UNLOCKED)
–
9/6 <reserved> –
9/7 <reserved> –