Siemens SIPROTEC4 7SJ61 - 5 Standard Mapping 2-4; Message in Output Direction; Double Commands (with Checkback Indication); Single Commands (Without Checkback Indication)

7SJ61...7SJ63, 7SJ65, 6MD63 PROFIBUS-DP – Bus mapping
C53000-L1840-B006-02
5-11
5 Standard mapping 2-4
Standard mapping 2-4
5
5.1 Message in output direction
5.1.1 Double commands (with checkback indication)
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
0/0 Q0 ON/OFF
OFF
0/1 Q0 ON/OFF
ON
Impulse output,
3 relays (2-pole ON, 1-pole OFF)
–
0/2 Q1 ON/OFF
OFF
0/3 Q1 ON/OFF
ON
Impulse output,
2 relays, 1-pole
–
0/4 Q8 ON/OFF
OFF
0/5 Q8 ON/OFF
ON
Impulse output,
2 relays, 1-pole
–
5.1.2 Single commands (without checkback indication)
• Ref. to chap. 1.5.1 and 1.6 for additional notes.
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
0/6 Output channel E1 (UsrSC5)
OFF
0/7 Output channel E1 (UsrSC5)
ON
Impulse output,
1 relay, 1-pole
–
5.1.3 Internal commands
• Ref. to chap. 1.5.3 for additional notes regarding "Changing the setting group".
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
1/0 Setting group A
1/1 Setting group A Activation of setting group A
53
1/2 Setting group B
1/3 Setting group B Activation of setting group B
54