Siemens SIPROTEC4 7SJ61 - Message in Input Direction; Annunciations; Double Commands - Checkback Signals; Single Commands - Status

Standard mapping 2-4
7SJ61...7SJ63, 7SJ65, 6MD63 PROFIBUS-DP – Bus mapping
C53000-L1840-B006-02
5-13
5.2 Message in input direction
5.2.1 Annunciations
5.2.1.1 Double commands – checkback signals
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
0/0 Q0 ON/OFF
OFF
0/1 Q0 ON/OFF
ON
Double-point indication ON/OFF –
0/2 Q1 ON/OFF
OFF
0/3 Q1 ON/OFF
ON
Double-point indication ON/OFF –
0/4 Q8 ON/OFF
OFF
0/5 Q8 ON/OFF
ON
Double-point indication ON/OFF –
5.2.1.2 Single commands – status
• Ref. to chap. 1.6 for additional notes.
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
0/6 Output channel E1 (UsrSC5) Single-point indication ON/OFF –
5.2.1.3 Application logic CFC
• Ref. to chap. 1.6 for additional notes.
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
0/7 CFC-Output indication 1
(UsCfcSpO1)
Single-point indication ON/OFF,
released as CFC output
–
1/0 CFC-Output indication 2
(UsCfcSpO2)
Single-point indication ON/OFF,
released as CFC output
–
1/1 CFC-Output indication 3
(UsCfcSpO3)
Single-point indication ON/OFF,
released as CFC output
–
1/2 CFC-Output indication 4
(UsCfcSpO4)
Single-point indication ON/OFF,
released as CFC output
–
1/3 CFC-Output indication 5
(UsCfcSpO5)
Single-point indication ON/OFF,
released as CFC output
–
1/4 CFC-Output indication 6
(UsCfcSpO6)
Single-point indication ON/OFF,
released as CFC output
–
1/5 CFC-Output indication 7
(UsCfcSpO7)
Single-point indication ON/OFF,
released as CFC output
–
1/6 CFC-Output indication 8
(UsCfcSpO8)
Single-point indication ON/OFF,
released as CFC output
–
1/7 CFC-Output indication 9
(UsCfcSpO9)
Single-point indication ON/OFF,
released as CFC output
–
5.2.1.4 Time overcurrent protection
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
2/0 50-2 TRIP 1 = 50-2 TRIP 1805
2/1 50-1 TRIP 1 = 50-1 TRIP 1815