Standard mapping 2-2
7SJ61...7SJ63, 7SJ65, 6MD63 PROFIBUS-DP – Bus mapping
C53000-L1840-B006-02
3-4
3.2 Message in input direction
3.2.1 Annunciations
3.2.1.1 Double commands – checkback signals
• Ref. to chap. 1.6 for additional notes.
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
0/0 Q0 ON/OFF
OFF
0/1 Q0 ON/OFF
ON
Double-point indication ON/OFF –
0/2 Q1 ON/OFF
OFF
0/3 Q1 ON/OFF
ON
Double-point indication ON/OFF –
0/4 Q8 ON/OFF
OFF
0/5 Q8 ON/OFF
ON
Double-point indication ON/OFF –
0/6 Q2 ON/OFF
OFF
0/7 Q2 ON/OFF
ON
Double-point indication ON/OFF –
1/0 Q9 ON/OFF
OFF
1/1 Q9 ON/OFF
ON
Double-point indication ON/OFF –
1/2 Switching device D1 (UsrDC1)
OFF
1/3 Switching device D1 (UsrDC1)
ON
Double-point indication ON/OFF –
1/4 Switching device D2 (UsrDC2)
OFF
1/5 Switching device D2 (UsrDC2)
ON
Double-point indication ON/OFF –
3.2.1.2 Single commands – status
• Ref. to chap. 1.6 for additional notes.
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
1/6 Output channel E1 (UsrSC5) Single-point indication ON/OFF –
1/7 Output channel E2 (UsrSC6) Single-point indication ON/OFF –
2/0 Output channel E3 (UsrSC10) Single-point indication ON/OFF –
3.2.1.3 Input channels with allocation to the binary inputs and tagging
• Ref. to chap. 1.6 for additional notes.
Offset Designation of the
SIPROTEC objects
Comments Internal
object no.
2/1 Input channel 1 (UsrSpO/C1) Single-point indication OPEN/CLOSE –
2/2 Input channel 2 (UsrSpO/C2) Single-point indication OPEN/CLOSE –
To Next Page
Loading...
