SIRIUS 3RV2 motor starter protectors
4.9 Accessories
SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03
431
Locking
∅ 3,5 ... 4,5 mm
The mechanism can be locked inside the control cabinet with a padlock. The motor starter
protector must be set to the O position first, before the lock is attached.
The mechanism can also be locked outside the control cabinet via the handle.
In this case too, the motor starter protector must be set to the O position first, before the
locks are attached. The locking device on the handle is then pulled forward. Up to five
padlocks with a maximum shackle diameter of 6 mm or three padlocks with a maximum
shackle diameter of 8.5 mm can be attached to this locking device.
To Next Page
Loading...
