Accessories
9.3 Auxiliary switch blocks
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
257
Solid-state compatible auxiliary switch blocks
Solid-state-compatible auxiliary switch blocks feature two encapsulated contacts, which are
particularly well suited to switching low voltages and currents (hard gold-plated contacts) and
for operation in dusty atmospheres. The rated operational current is I
e
/AC-14 and DC-13:
1 to 300 mA, voltage: 3 to 60 V.
The solid-state compatible auxiliary switch blocks for mounting on the front are available with
screw-type, spring-loaded, and ring cable lug connections. The laterally mountable solid-
state compatible auxiliary switch blocks are available with spring-loaded connections.
Auxiliary switch blocks with overlapping contacting
Auxiliary switch blocks with overlapping contacting are available with screw-type and spring-
loaded connections. The table below shows the versions of the auxiliary switch blocks
available with overlapping contacting.
Table 9- 7 Auxiliary switch blocks with overlapping contacting
2 NO contacts + 2 NC contacts
3RH2911-1FB11 (11U) 11U 1 NO contact + 1 NC contact
3RH2911-1FB22 (11, 11U) 11, 11U 1 NO contact + 1 NC contact + 1 leading NO contact +
The travel diagrams below for auxiliary switches in sizes S00 and S0 apply to standard
auxiliary switches and to leading/lagging contacts.
Figure 9-5 Travel diagrams for auxiliary switches (sizes S00 and S0)
To Next Page
Loading...
