Accessories
9.26 Assembly kit for reversing contactor assemblies (sizes S00 to S3)
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
379
Mounting the reversing contactor assembly with spring-loaded connection - size S2
The illustrations below show the components of the assembly kit for the reversing contactor
assembly in size S2, and they explain the assembly procedure. The mechanical interlock
and the connecting clips are mounted in the same way as described for size S2 with screw-
type connection.
Attach the wiring modules for connecting the main current paths to the contactors from above
Attach the wiring modules for connecting the main current paths to the contactors from below
Screw the wiring modules tight with a screwdriver.
To connect the control current paths (b), push the conductors into the contactor terminals.
To connect the control current paths (c), push the conductors into the contactor terminals.
To Next Page
Loading...
