Siemens SIRIUS 3RW44 - Mounting Dimensions and Clearances

Installation, Connection and Branch Layout
SIRIUS 3RW44 System Manual
GWA 4NEB 535 2195-02 DS 04
3-3
3.1.4 Mounting Dimensions and Clearances
For uninhibited cooling, ventilation and venting of the heat sink, it is essential
that the minimum clearance from other devices is strictly observed.
Figure 3-2:Clearance to other devices
Notice
Ensure that there is sufficient clearance so that air can freely circulate for
cooling. The device is ventilated from bottom to top.
1
1
3
5
2
4
6
≥ 5mm
[≥ 0.2 in]
≥ 5mm
[≥ 0.2 in]
≥ 100 mm
[≥ 4in]
≥ 75 mm
[≥ 3in]