Device Functions
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 02
6-17
6.5 Current Limits for Load Monitoring
It is possible to set upper and lower current limits; if these limits are exceeded or
undershot, a message can be output.
Minimum current
limit
The lower current limit can, for example, be used to indicate a V-belt break and
the corresponding no-load current of the motor or that the fan filter is clogged.
Maximum current
limit
The upper limit value can be used to determine increased power loss in the
application e.g. caused by storage damage.
To Next Page
Loading...
