Commissioning
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 02
5-1
Commissioning 5
Section Subject Page
5.1 Menu Structure, Navigation, Changing Parameters 5-2
5.1.1 Menu Structure and Navigation 5-2
5.1.2 Changing Parameters: for Example Motor Data 5-3
5.2 Switching on for the First Time 5-4
5.2.1 Quick Start Menu 5-4
5.3 User-specific Commissioning 5-6
5.3.1 "Settings" Main Menu Item 5-7
5.4 Making Settings in the Selected Parameter Set 5-8
5.4.1 Selecting the Parameter Set 5-8
5.4.2 Entering Motor Data 5-9
5.4.3 Specifying the Starting Mode 5-11
5.4.4 Specifying the Stopping Mode 5-18
5.4.5 Setting Slow Speed Parameters 5-24
5.4.6 Specifying Current Limits 5-25
5.4.7 Parameterizing the Inputs 5-26
5.4.8 Parameterizing the Outputs 5-27
5.4.9 Selecting Motor Protection Settings 5-29
5.4.10 Selecting Display Settings 5-30
5.4.11 Specifying the Protective Functions 5-31
5.4.12 Specifying the Names on the Device Display 5-32
5.4.13 Saving Options 5-33
5.5 Other Device Functions 5-37
5.5.1 Measurement-value display 5-37
5.5.2 Status Display 5-38
5.5.3 Motor Control (Assigning Control Priority) 5-39
5.5.5 Safety (Specifying the User Level, Parameterization Protection) 5-44
To Next Page
Loading...
