Siemens SIRIUS 3RW52 - Page 31

Description
3.5 Access options for the 3RW52 soft starter
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
31
Monitoring
Diagnostics
Control
Parameter setting
3RW5 HMI High Feature
ᅚ
ᅚ
ᅚ
-
2), 3)
3RW5 HMI Standard
ᅚ
ᅚ
ᅚ
-
4)
SIRIUS Soft Starter ES
(TIA Portal)
1)
ᅚ ᅚ ᅚ -
Fieldbus via
3RW5 communication module
ᅚ
(via user program)
ᅚ ᅚ -
3RW52 soft starter
LEDs
LEDs
Via input IN
Setting elements
1)
Via the local interface on the 3RW5 HMI High Feature or via a 3RW5 PROFINET or
PROFIBUS communication module.
2)
Analog output (for device version with analog output only) and ON / RUN relay output can be set.
3)
Communication parameters of all compatible communication modules can be set.
4)
Station address can be set for a 3RW5 PROFIBUS and Modbus RTU communication module.