Siemens SIRIUS 3RW52 - Page 111

Functions
7.9 High Feature 3RW5 HMI
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
111
Navigating and setting
The keys are used for navigation, for selecting and setting menu items and for executing
predefined actions.
Note
Setting parameters.
Please note that parameters which are set manually using the 6 setting elements cannot be
parameterized via the 3RW5 HMI High Feature.
Key
Actions
• Move one position to the right in the input field
• Move one position to the left in the input field
• Jump to next menu item
• Set number or letter
• Jump to previous menu item
• Set number or letter
• To confirm
• To open the menu
• Jump to selected menu item
• To exit the menu
• Motor stops as parameterized if the 3RW5 HMI High Feature is the master control
• Motor starts as parameterized if the 3RW5 HMI High Feature is the master control
After an error has been acknowledged when using the 3RW5 HMI High Feature, you
must repeat the ON command by pressing the "Motor Start" key.
• F1: LOCAL / REMOTE: Changes master control
• F2: Reset
• F3-F9: Can be freely parameterized (only available for 3RW55 soft starter)
Master RESET key for restoring the factory settings:
• Soft starter
1)
• Communication
• 3RW5 HMI High Feature
• All
1)
1)
All parameters that have not been set by means of the setting elements are reset.