Siemens SIRIUS 3RW55 - Page 102

Diagnosis [1/2]
Soft Starter
∟ Inputs
- Diagnosis state
∟ Errors
∟ Warnings
- Device state
∟ Active parameter set
∟ Type of connection
∟ Rotation direction
∟ Device I/Os
∟Energy saving mode
∟ [...]
3)
- Statistic data
∟ Active energy import total
∟ Operating hours - motor
∟ Reset operating hours motor
∟ Number of motor overload trips
∟ Number of starts motor CW
∟ Number of starts motor CCW
∟ Number of starts output1
∟ Number of starts output2
∟ Number of starts output3
∟ Number of starts output4
∟ Number of braking stops
∟ Phase current max (%)
∟ Phase current max (A)
∟ Last tripping current IA (%)
∟ Last tripping current IA (rms)
∟ Number of switching element overload trips
∟ Number of bypass overload trips
∟ Operating hours - device
∟ Last real starting time
- Maximum pointer
∟Phase currents (%)
∟ Phase current I L1 min
∟ Phase current I L2 min
∟ Phase current I L3 min
∟ Phase current I L1 max
∟ Phase current I L2 max
∟ Phase current I L3 max
∟ Phase current I L1 min
∟ Phase current I L2 min
∟ Phase current I L3 min
∟ Phase current I L1 max
∟ Phase current I L2 max
∟ Phase current I L3 max
∟Phase currents (rms)
∟ Outputs
∟ [...]
1)
∟ [...]
2)
1)
Display of active inputs
2)
Display of active outputs
3)
Further menu items. Refer to chapter Performing diagnostics on the 3RW55 and 3RW55 Failsafe soft starters using the
3RW5 HMI High Feature (Page 257).
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
102 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006