Siemens SIRIUS 3RW55 - Page 113

Parameters [9/12]
Soft Starter
Setting
Factory
Setting
Customer
∟ Motor CW
∟ Motor CCW
∟ Reset
∟ Emergency start
∟ Creep speed
∟ Output 1
∟ Output 2
∟ Parameter set
∟ Substitute value
∟ Parameter set 1
∟ Parameter set 3
∟ Parameter set 2
∟ Disable Quick-stop
∟ Output 3
∟ Use alternative stopping mode
∟ Motor standstill
∟ Parameters of CPU/master disabled
∟ Response to overload switching element
∟ Bypass operating mode
∟ Permissible main power rotation
∟ Response to preset unequal actual configuration of HMI
∟ Internal bypass
∟ No bypass
∟ External bypass without current measurement
∟ Ignore
∟ Warn
∟ Turn off
∟ Turn off without restart
∟ Turn off with restart
∟ Deactivate
∟ Activate only for startup parameter
∟ Activate
∟ Group error only at ON command
∟ Warn
∟ Any
∟ Counter-clockw.
∟ Clockwise
∟ Response to faulty main power
∟ Typical ambient temperature
- Date and time
∟ Edit time
∟ Time format
∟ Time offset
∟ Display time
∟ Disable
1)
∟ Enable
1)
∟ Edit date
∟ Format of date
MMDDYY
x
x
x
x
0
0
0
0
0
0
0
0
0
0
0
x
x
x
60 °C
12 h
x
+00:00
1)
Display depends on the current setting
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 113