Siemens SIRIUS 3RW55 - 11 Dimension Drawings; 11.1 CAx Data

Process data Process image
DI 0.6 Input 3
DI 0.7 Input 4
DI 1.0 Motor current Iact-bit0
DI 1.1 Motor current Iact-bit1
DI 1.2 Motor current Iact-bit2
DI 1.3 Motor current Iact-bit3
DI 1.4 Motor current Iact-bit4
DI 1.5 Motor current Iact-bit5
DI 1.6 Operating mode manual - local
DI 1.7 Ramp operation
DI 2.0 Motor CW
DI 2.1 Motor CCW
DI 2.4 Starting mode active
DI 2.5 Operation / bypass active
DI 2.6 Stopping mode active
DI 2.7 Test mode active
DI 3.0 Thermal motor model overload
DI 3.1 Temperature sensor overload
DI 3.2 Switching element overload
DI 3.3 Cooling time active
DI 3.4 Device error
DI 3.5 Automatic parameterization active
DI 3.6 New Ex parameter values detected
1)
AI 4 (Float32) Measured value 1 You will 󹪝nd further information on
the settable measured values in chap‐
ter Cyclic send data (Page 205).
AI 8 (Float32) Measured value 2
AI 12 (Float32) Measured value 3
1)
3RW55 soft starter from 󹪝rmware version V2.0 or 3RW55 Failsafe soft starter from 󹪝rmware
version V1.0
Process image output (PIQ)
Process data Process image
DQ 0.0 Motor CW
DQ 0.1 Motor CCW
DQ 0.3 Reset
1)
DQ 0.4 Emergency start
2)
DQ 0.5 Self-test (user-test)
DQ 0.6 Creep speed
3)
DQ 1.0 Output 1
4), 5)
DQ 1.1 Output 2
4), 5)
DQ 1.2 Parameter set bit 0
6)
DQ 1.3 Parameter set bit 1
6)
Functions
8.12 Inputs
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 197