Siemens SIRIUS 3RW55 - Page 200

Setting options
• 3RW5 HMI High Feature
Menu: "Parameters > Soft Starter > Outputs"
Access protection to the 3RW5 HMI High Feature is not active or has been reset.
• With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the 3RW5 HMI High Feature
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Parameters" > Window "Work area" > "Soft Starter > Outputs > Soft Starter"
• With a 󹪝eldbus via a 3RW5 communication module:
– With SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (only via a 3RW5 PROFINET
or PROFIBUS communication module)
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
– Con󹪝guration software of the control system (e.g. STEP 7 with corresponding HSP)
– User program
You can 󹪝nd additional information on the parameters that can be set via the 󹪝eldbus in the
manual of the respective 3RW5 communication module.
Parameter - Delay
Parameters Description
ON delay time The switching of the output is delayed by this time.
• Factory setting: 0 s
• Setting range: 0 ... 6 500 s
• In steps of: 0.1 s
OFF delay time
Parameter - Output action
Output action Description Factory setting
DQ1 DQ2 DQ3
1)
DQ4
2)
No action - - x - x
Activation by external control sources
Control source PIQ-DQ-1.0 output 1 The control command "Output 1" is assigned to the
corresponding digital output.
Refer to chapter Control via 3RW5 HMI High Fea‐
ture (Page 232).
- - - -
Control source PIQ-DQ-1.1 output 2 The control command "Output 2" is assigned to the
corresponding digital output.
Refer to chapter Control via 3RW5 HMI High Fea‐
ture (Page 232).
- - - -
Control source PIQ-DQ-2.0 output 3
3)
The control command "Output 3" is assigned to the
corresponding digital output.
Refer to chapter Control via 3RW5 HMI High Fea‐
ture (Page 232).
- - - -
Control source input 1 Digital output is activated by "Digital input 1". - - - -
Functions
8.13 Outputs
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
200 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006