Siemens SIRIUS 3RW55 - ATEX; Iecex; Atex;Iecex-Certified Motor Overload Protection

Parameters
Parameters Description
Measured value 1 For "Measured value 1", "Measured value 2" and "Measured value 3"
specify one measured value in each case:
• Phase current I L1 (rms) (factory setting measured value 1)
• Phase current I L2 (rms) (factory setting measured value 2)
• Phase current I L3 (rms) (factory setting measured value 3)
• Power factor L1...3
• Phase current average (rms)
• Active energy import (total)
• Active power
Measured value 2
Measured value 3
8.14 ATEX / IECEx
8.14.1 ATEX/IECEx-certi󹪝ed motor overload protection
Observe the safety instructions in chapter ATEX / IECEx (Page 16).
Functions
8.14 ATEX / IECEx
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
206 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006