Illustration similar
• Open the hinged cover ① at an angle of approx. 20°.
• Loosen the hinges vertical to the soft starter surface ② / ③ starting from the bottom.
• Take the cover o the 3RW55 or 3RW55 Failsafe soft starter.
• Follow the steps in reverse order to install the replacement hinged cover.
Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 69
To Next Page
Loading...
