Siemens SIROTEC Engineering Manual

SINAMICS S120
Engineering Information
SINAMICS Engineering Manual – November 2015
Ó Siemens AG
364/528
6.6.2 Capacitance values
In order to check that the overall capacitance does not exceed the limit values, all individual capacitance values at
the DC link (including the internal capacitance of the Line Module) must be added. To facilitate system configuration,
the possible additional capacitance of the drive configuration has been incorporated into the tables below without the
internal capacitance of the Line Module. This is named “Reserve Precharging”.
The following capacitance values apply:
Basic Line Modules
Order No.
Output at
400 V or 690 V
[kW]
Rated DC link current
[A]
DC link
capacitance
[µF]
Maximum DC link
capacitance
[µF]
Precharging reserve
[µF]
Supply voltage 380 V to 480 V 3AC
6SL3x30-1TE34-2AA3
1
200 420 7200 57600 50400
6SL3x30-1TE35-3AA3
1
250 530 9600 76800 67200
6SL3x35-1TE37-4AA3
2
360 740 12000 96000 84000
6SL3x30-1TE38-2AA3
1
400 820 14600 116800 102200
6SL3x30-1TE41-2AA3
1
560 1200 23200 185600 162400
6SL3730-1TE41-2BA3
3
560 1200 23200 185600 162400
6SL3730-1TE41-2BC3
3
560 1200 23200 185600 162400
6SL3x35-1TE41-2AA3
2
600 1220 20300 162400 142100
6SL3x30-1TE41-5AA3
1
710 1500 29000 232000 203000
6SL3730-1TE41-5BA3
3
710 1500 29000 232000 203000
6SL3730-1TE41-5BC3
3
710 1500 29000 232000 203000
6SL3x35-1TE41-7AA3
2
830 1730 26100 208800 182700
6SL3x30-1TE41-8AA3
1
900 1880 34800
139200/278400
4
104400/243600
4
6SL3730-1TE41-8BA3
3
900 1880 34800 139200/278400
4
104400/243600
4
6SL3730-1TE41-8BC3
3
900 1880 34800 139200/278400
4
104400/243600
4
Supply voltage 500 V to 690 V 3AC
6SL3x30-1TG33-0AA3
1
250 300 3200 25600 22400
6SL3x35-1TG34-2AA3
2
355 420 4800 38400 33600
6SL3x30-1TG34-3AA3
1
355 430 4800 38400 33600
6SL3x30-1TG36-8AA3
1
560 680 7300 58400 51100
6SL3x35-1TG37-3AA3
2
630 730 7700 61600 53900
6SL3x30-1TG41-1AA3
1
900 1100 11600 92800 81200
6SL3730-1TG41-1BA3
3
900 1100 11600 92800 81200
6SL3730-1TG41-1BC3
3
900 1100 11600 92800 81200
6SL3x35-1TG41-3AA3
2
1100 1300 15500 124000 108500
6SL3x30-1TG41-4AA3
1
1100 1400 15470 123760 108290
6SL3730-1TG41-4BA3
3
1100 1400 15470 123760 108290
6SL3730-1TG41-4BC3
3
1100 1400 15470 123760 108290
6SL3x35-1TG41-7AA3
2
1370 1650 19300 154400 135100
6SL3x30-1TG41-8AA3
1
1500 1880 19500 78000/156000
4
58500/136500
4
6SL3730-1TG41-8BA3
3
1500 1880 19500 78000/156000
4
58500/136500
4
6SL3730-1TG41-8BC3
3
1500 1880 19500 78000/156000
4
58500/136500
4
1
The order number 6SL3x30 stands for the air-cooled S120 Chassis and Cabinet Modules.
2
The order number 6SL3x35 stands for the liquid-cooled S120 Chassis and Cabinet Modules
3
These units are exclusive to the air-cooled S120 Cabinet Modules range.
4
The value in front of the "/" applies to S120 diode-based BLMs with one precharging resistor per phase, the value after the "/"
to S120 diode-based BLMs with two precharging resistors connected in parallel per phase, see section "Precharging of the DC
link and precharging currents", subsection "Basic Infeed: Diode-based Basic Line Modules".

Siemens SIROTEC Specifications

General

Brand	Siemens
Model	SIROTEC
Category	DC Drives
Language	English