Integrating the library contents
6.2 Working with the library in WinCC flexible
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
77
12 Assign the global DB “PSU_Global” number (example: DB15 in this case) to the tag.
13 Assign “PSU_Global” tag to the faceplate.
1. Select the faceplate.
2. Go to “Properties”.
3. Select “Dynamic Interface”.
4. Assign “PSU_Global” tag to “PSU_Data” property as shown in figure below.
To Next Page
Loading...
