Integrating the library contents
6.3 Working with the library in WinCC V7.3
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
89
4 Check whether the PSU8600 structure is created successfully. The tags required to display the parameters of
the PSU8600 in the screen windows are now included in the WinCC project.
5 In “Structure Tags” (1) folder, select “SITOP/PSU8600_V2_3” (2). Click the “Structure tags” tab (3).
Select the “PSU_Global_Tags” tag and select a connection that is made between a PLC and an OS. Enter
Global DB “PSU_Global” (DB15 in this case) address in the “Address” column.
To Next Page
Loading...
