Integrating the library contents
6.3 Working with the library in WinCC V7.3
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
92 Function Manual, 11.2017, A5E37764016-06-76
Dragging screen windows into an HMI screen
Table 6- 12
1 Open the WinCC project.
2 Open the screen in which you want to configure the screen windows. In this example, the screen name is
In the "Library" window, select "Project library" folder.
To Next Page
Loading...
