Engineering and remote access
7.4 SIMATIC STEP 7 in the TIA Portal
Power supply system SITOP PSU8600
174 Manual, 09.2018, A5E36758446-5-76
4. Select the required SITOP PSU8600 with a mouse click.
In the "Information" area you can then see information about the SITOP PSU8600. If
necessary, change the version that was preselected.
5. Drag the SITOP PSU8600 and drop it into the Network view.
Alternatively, the module can also be added to the network view by double-clicking on the
entry in the Hardware catalog.
You have now inserted the SITOP PSU8600 into the project. The rectangle displayed in the
network view symbolizes the SITOP PSU8600.
To Next Page
Loading...
