Engineering and remote access
7.6 Cyclic and acyclic data
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
241
7 1-6 1 Hardware settings Reading Hardware settings of the expansion mo-
dule SITOP CNX8600 (settings that were
made at the front of the device).
48 bytes
32 1-6 1 State information Reading Status information about the
expansion module SITOP CNX8600.
124 bytes
You can find detailed information about the individual data sets in Section "Data sets SITOP
CNX8600 (Page 255)".
Reading and writing data sets SITOP BUF8600
SITOP BUF8600 100 ms/40 A and SITOP BUF8600 300 ms/40 A
6 1-6 1 Device information Reading Information about the buffer components
42 bytes
32 1-6 1 State information Reading Status information about the buffer com-
14 bytes
SITOP BUF8600 4 s/40 A and SITOP BUF8600 10 s/40 A
6 1-6 1 Device information Reading Information about the buffer components
42 bytes
32 1-6 1 State information Reading Status information about the buffer com-
16 bytes
You can find detailed information about the individual data sets in Section "Data sets SITOP
BUF8600 (Page 260)".
Reading and writing data sets SITOP UPS8600
1 1-6 1 General values
General settings of the SITOP UPS8600.
Writing Adjustable parameters for the general
configuration of the SITOP UPS8600.
8 bytes
6 1-6 1 Device information Reading Information about the UPS module
42 bytes
7 1-6 1 Hardware settings Reading Hardware settings of the UPS module
SITOP
UPS8600 (settings that were made
at the front of the device).
36 bytes
32 1-6 1 Actual state infor-
Reading Status information about the
expansion module SITOP UPS8600.
16 bytes
To Next Page
Loading...
