Siemens SITOP series - Simatic Step 7; Integrating the Library Blocks into SIMATIC STEP 7

Working with the library
7.2 SIMATIC STEP 7
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
101
7.2
SIMATIC STEP 7
7.2.1
Integrating the library blocks into SIMATIC STEP 7
Hardware requirements
● CPU 1214C DC/DC/RLY
● SITOP PSU8600
● TP1200 Comfort
System requirements
You have created your TIA Portal project and completed hardware and network
configurations.
● Hardware configuration
– SITOP power supply (including the expansion modules)
– Controller
● Network configuration
– PROFINET connection between the controller and SITOP power supply