Working with the library
7.2 SIMATIC STEP 7
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
102 Function Manual, 11.2018, A5E37763954-09-76
Inserting blocks from the library into the program
Follow these steps to integrate the function blocks and the associated data blocks into a
SIMATIC STEP 7 V15.1 project:
Table 7- 2
In TIA Portal, open the project into which you want to insert the function block.
2 In the "Libraries" window, under the "Global libraries" palette, open "PSU8600_Library_V15-1_V2-4" block
library. Navigate to "Master copies > PSU8600 STEP7 > S7-1200/S7-1500 > UDT_PSU8600_1200/1500".
To Next Page
Loading...
