Siemens SITOP series - Page 117

Working with the library
7.3 WinCC Comfort/Advanced
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
117
Step number
Instruction
4 In the "Project tree", select and open the screen with your faceplate.
5
Click "Properties > Interface".
6 Select the "PSU_Data" tag and connect an HMI tag to it. Select your HMI tag with the data type
"PSU8600_Data_1200…".