Siemens SITOP series - Page 119

Working with the library
7.3 WinCC Comfort/Advanced
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
119
Step number
Instruction
4 Add four trends and assign the appropriate tags from the PSU_Global.
• Select 600 trend points for the trend representation.
• Select a 0.5 seconds cycle.
5 Select the trend colors for the individual outputs according to the legend.
Assign the following colors so they match the legend of the faceplate.