Siemens SITOP series - Inserting HMI Tag Table in Wincc

Working with the library
7.4 WinCC Professional
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
128 Function Manual, 11.2018, A5E37763954-09-76
7.4.2
Inserting HMI tag table in WinCC
Procedure
Follow these steps to insert HMI tag table in WinCC:
Table 7- 11
Step number
Instruction
1
In the "Project tree", open the project into which you want to insert the faceplate.
2 In the "Libraries" window, open the global library "PSU8600_Library_V15-1_V2-4" and navigate through
the folders "Master copies > PSU8600 WinCC > S7-1200"
and select "Tag Table Professional" tag table.