Siemens SITOP series - Page 130

Working with the library
7.4 WinCC Professional
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
130 Function Manual, 11.2018, A5E37763954-09-76
Configuring connections of the HMI tag table
Follow these steps to configure connections in the HMI tag table:
Table 7- 12
Step number
Instruction
1 In the "Project tree", navigate to the "HMI tags" folder of your WinCC project. Open the tag table "Tag
Table-1200_Professional".
2 Adjust the connections for all the tags. Select your HMI connection of the controller and Runtime Profes-
sional.
3 For the "PSU_Data" tag, define the address of the data block for global data exchange.