Siemens SITOP series - Inserting Screen in a Wincc Project

Working with the library
7.4 WinCC Professional
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
131
7.4.3
Inserting screen in a WinCC project
Adopting a screen in WinCC
Follow these steps to adopt a screen in WinCC:
Table 7- 13
Step number
Instruction
1
In the "Project tree", open the project into which you want to insert the screen.
2 In the "Libraries" window, under the "Global libraries" palette, open "PSU8600_Library_V15-1_V2-4" block
library. Navigate through the folders "Master copies > PSU8600 WinCC > Screens > Professional" and
select "PSU8600_Professional" screen.