Siemens SITOP series - Page 133

Working with the library
7.4 WinCC Professional
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
133
Dragging screen windows into an HMI screen
Follow these steps to drag screen windows into an HMI screen:
Table 7- 14
Step number
Instruction
1
In the "Project tree", open the screen to which you want to add the screen window for SITOP PSU8600
power supply.
2 Drag-and-drop the "Screen_window_PSU8600" library element into your screen.
Your screen window is created.