Siemens SITOP series - Fb Sitop_Psu8600_S;Sitop_Psu8600_S1

SIMATIC STEP 7 function blocks
5.8 FB SITOP_PSU8600_S/SITOP_PSU8600_S1
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
42 Function Manual, 11.2018, A5E37763954-09-76
5.8
FB SITOP_PSU8600_S/SITOP_PSU8600_S1
Function principle
The block reads data of the PSU8600 main module (single power supply with 1 output
channel) and writes it to the global transfer data block.
Note
SITOP_PSU8600_S is compatible with Firmware version 1.1
- 1.3.
SITOP_PSU8600_S1 is compatible with Firmware version 1.4.
Block diagram
Figure 5-15
Function characteristics
Figure 5-16