Siemens SITOP series - Page 60

SIMATIC STEP 7 function blocks
5.12 FB SITOP_UPS8600
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
60 Function Manual, 11.2018, A5E37763954-09-76
Input parameters (S7-1200/1500)
Table 5- 43
Parameter
Data type
Description
Execute
Bool On the rising edge (0 > 1), data at the inputs of
the block is written to the UPS8600.
UPS8600_No
Int
Number the plugged UPS8600 module.
HW_Ident_Head
HW_IO Start address of the entire main module.
(Reference, system tag: here,
"PSU~UPS8600_V1_4_1~UPS8600_V1_4".
This refers to the UPS8600 submodule of first
UPS8600 connected to the PSU)
Buffering_In_Param
UDT_UPS8600_BUF_IN
UDT for UPS8600 general input parameters.
Structure of UDT_UPS8600_BUF_IN data type
Table 5- 44
Parameter
Data type
Description
Max_Charging_Power
Byte
Maximum charging power allowed.
Bat_Test_Interval
Byte
Intervals of the battery test.
Buf_Timer_Enable
Byte
Buffer time enable.
Buf_Timer
UDInt
Buffer timer.
Padding
Byte
Unused.