Siemens SITOP series - Page 67

SIMATIC STEP 7 function blocks
5.13 FB SITOP_PSU8600_Buffering_1
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
67
Structure of UDT_Buffering_OUT_1 data type
Table 5- 54
Parameter
Data type
Description
Buffering_disable_by_input
Byte
Buffering disabled by inputs (0 = no, 255 = yes)
Buffer_ready
Byte Buffer ready (0 = no, 255 = yes)
Charging_state
Byte
Charging state (0 to 100 %)
Buffer_disable_by_cont
Byte Buffer component disabled via control contact
(0 = no, 255 = yes)
Total_UPS_ChargingPower
UInt Actual total UPS Charging Power in milliwatts
(0 to 24000), (10 mW resolution)
Sys_Start_From_Battery
Byte System started from battery (0=System started from
mains, 1=System started from UPS[1], 2=System
started from UPS[2])